How to Operate and Use the Vacuum Kneader

For the standard operation of the vacuum kneader, it is a condition to make the kneader run normally and put it into work better. What should we pay attention to when operating?

Before operating the vacuum kneader, we need to make preparations. We need to turn on the power switch first, prepare the spare materials and glue, so as not to mess up when the vacuum kneader is operating, and check whether the motor is running normally when starting the motor.

When the 1. cylinder head is lowered, do not put your hands on the cylinder port to avoid crushing your fingers.

Cover the lid and tighten the bolts when mixing the 2.

3. the discharge should stop stirring.

When 4. the cylinder body, pay attention to the rotation range of the cylinder body to avoid hurting the human body.

5. shaft end is equipped with an adjustable sealing sleeve, which can be adjusted when material leaks.

If any abnormality is found during the work of the 6., the machine should be shut down immediately and measures should be taken to eliminate the fault. It is strictly forbidden to work under abnormal conditions.

The above is a description of the standard operation.